How To Create a Working Payload and SSH Account on HTTP Injector


    I know you have been waiting for such a Topic on this blog and I am here to teach you that. We are going to learn how to create a working payload on HTTP Injector 2018. It will be prety easy to create a config for HTTP Injector ones I am done with this tutorial.
    Create a Working Payload on HTTP Injector

    Before you visited this post, you should have some basic knowledge about HTTP Injector and how it works. Its a VPN and also a tunneling app used to Bypass ISP Restriction, Get access to any site, Browse through a proxy and even get access to Free internet on your ISP without paying. There are many uses of HTTP Injector VPN.

    In this post, I will briefly teach you how to Find a working payload, but I wouldn't go much into the details. You will also learn how to create Config for HTTP Injector and how to create a fast SSH account for HTTP Injector.

    HOW TO FIND A WORKING PAYLOAD FOR HTTP INJECTOR

    Find a working host on HTTP Injector

    1. Get your host from your ISP Free Sites or Subscription URL e.g mPulse
    2. Scan the host with any Host checker
    3. If the host is active, then you are close ( 200 OK Establish is recommended)
    4. Check for Header Information on HTTP Injector >> Tools >> Host Checker
    5. Use direct request and GET
    6. Look closely for Extra Header info like Keep-alive or User agent
    7. Now use Payload Generator to set it up.
    This is how to Create a Working Payload on HTTP Injector. 

    Note: There are website's and tools used for this, but I do not want to share my tools used to scan for hosts and check hosts. Do your research on that!

    CREATE HTTP INJECTOR CONFIG FILE

    Create HTTP Injector Configuration File

    1. Click on Payload Generator
    2. Input your Host on URL/Host
    3. Choose your Request method: CONNECT/GET/POST
    4. Choose your Query method: Front or Back
    5. Tick your Extra Header:  Online host/ Keep-alive e.t.c
    6. Now Generate Payload
    Generate Payload on HTTP INJECTOR

    If your ISP has an APN Proxy and Port, do this;
    1. On HTTP Injector, click on Tunnel Type >> Secure Shell
    2. Connect Via: HTTP Proxy
    3. Options: Tick "Custom Payload"
    4. Save
    5. Click Remote proxy and input your ISP Apn Settings like below
    Bonus: MTN Nigeria Proxy
    Proxy: 10.199.212.2
    Port: 8080

    SEE ALSOAirtel India Syphon G Kings 2018 Free Internet Settings

    Export your Config and Share to others to download your HTTP Injector Config. You can lock it or leave it unlocked if you wish!

    CREATE SSH ACCOUNT FOR HTTP INJECTOR

    Some Website's to create 30 Days SSH Accounts, 1 month SSH Account, 15 Days SSH Account, 7 Days SSH account.
    SSH account 30 days, 7 days HTTP

    1. Fastssh.com
    2. FreeVpn.Us
    3. vpnjantit.com (Premium Config)
    4. SSHStores.com
    5. Search Google for more
    Now visit any of these sites and create an SSH account. Choose your username and password and submit. 

    Now you will get your SSH Info like; Username and Password, Server Name and Ip, Server Port (443), Squid ( 8080, 80). 

    Note: It is recommended to choose Singapore when creating SSH in Africa because they are the closest to us and this, in turn, increases the stability and speed of the HTTP Injector Config.
    Note 2: Create an SSH account from a server that has 8080, 3128 and 80 as squid proxy port especially if your host ISP Port has any of the above Ports on it's APN.
    Now, let's learn how to set up the SSH account on HTTP Injector so that we can create our own HTTP Injector Configuration File.

    Do this;
    HTTP Injector Payload generator

    1. Swipe left to right on HTTP Injector
    2. Click on SSH Settings
    3. Tick Secure Shell (SSH)
    4. Under SSH Host, input the SSH host
    5. Input the port e.g 443, 22; (443 Recommended)
    6. Input your username on Account information and Password
    7. >> Username is usually your username-SSH website ending with . com
    8. Bonus: Scroll down and Enable Data Compression
    9. Go back and connect.
    Note: Make sure you do not forget to set up the tunnel Type to Proxy >> SSH (Custom Payload).

    Now, check your log information for connection status. You'll get 200 OK connection to establish and boom. Connected!.

    This is how to Create a Working Payload on HTTP Injector, Find a Working host, and create an SSH account to set it on HTTP Injector VPN. Wait! Before you leave, you need to join our Telegram Group for discussionand Channel for new Config and for Some info not posted on this blog.

    Also, in case you aren't aware, we discovered the MTN 1GB leaked by bloggers and we have discovered numerous loopholes on ISP and some VPN that works free on some Networks. 

    DISCLAIMER: UcheTechs Blog share Free Internet tips and settings here for educational purposes and to alert ISP of their vulnerabilities, this site isn't responsible for what you do with your newly acquired knowledge. 

    CREDITS: UcheTechs  - You must leave credits to this blog before copying our posts. Bloggers especially. No copy and Paste. DMCA is real!

    13 comments:

    1. Nice one really help full thanks for the tutorial

      ReplyDelete
      Replies
      1. I am glad you did. Don't forget to share this with friends

        Delete
    2. You would have just do a video tutoria

      ReplyDelete
      Replies
      1. Yea, that will be better too. Thanks for sharing your thoughts

        Delete
    3. I keep getting error message...pls can u help me more on this

      ReplyDelete
    4. How can I scan for a working host for mtn mpulse pls

      ReplyDelete
    5. when it said injecting.. .

      Just shows error

      I have tried several times

      Plz help me my man.. .

      ReplyDelete
    6. Finally...I've created my first congiy file... All thanks to uchetechs 👍

      ReplyDelete
    7. Thank you so much. I have been looking for this post. Please also write about KPN Tunnel config and I will gladly share it on my social handler and Telegram channel.

      ReplyDelete
    8. I tried ticking the secure shell and it's not working. Beside the payload tutorials is difficult to understand. I'm sure no one among those commenting has done it correctly. if you want us to learn, you should include everything including the host checker we should use and make use of screenshots in the payload tutorials. Thanks for the little tips though, let me go and browse more

      ReplyDelete
    9. I would really appreciate this if you can explain it in layman's terms. I really want to learn this but I don't understand your explanation. Thanks in advance

      ReplyDelete
    10. Very wonderful. Credits to Uchetechs

      ReplyDelete